Netgear AC5300 X8 Nighthawk
Netgear Networking corporation has come up with a brand new Netgear AC5300 X8 Nighthawk smart, fast , durable Wi-Fi Router, this brand new Netgear AC5300 X8 is one of the most powerful router till date and in the top fourth product in the Netgear Networking corporation series of all Hi-End Netgear Nighthawk routers. According to Australia Router Support (ARS) Inc. , brand new Netgear AC5300 X8 router is one high-end solution to all the problems caused to all the Netgear customers. The increasing number of devices coming up in day to day life’s home networks, this Netgear AC5300 X8 comes with advanced technology and various features designed to give all technicians over the globe a good switch on because of this routers increased range and performance.
Netgear AC5300 X8 Nighthawk Tri-Bandwidth Technology
This Netgear AC5300 X8 Nighthawk is a tri-bandwidth technologically equipped wireless router who can deliver network speed which is up to 1000 Mb/S for the 2.4 GHz bandwidth, and 2166 Mb/S for its two different 5 GHz bands.
In the required processing, Netgear AC5300 X8 Nighthawk router uses Broadcom’s 40 nm-based BCM 4709 communicative processor with a 1.4 GHz ARM Cortex – A9 dual – core at the heart of its microstructure, and a BCM 4366 SoC that gives Netgear AC5300 X8 Nighthawk its 802.11ac tri-bandwidth support.
According to the connectivity section of Netgear AC5300 X8 Nighthawk , which includes six gigabit Ethernet ports on the back of the router, total of eight antennas (four external-four internal), two Universal Serial Bus ports (2.0 and 3.0) & one WAN/Internet port gets this router fully equipped.
The Netgear AC5300 X8 Nighthawk is compatible with Network Attached Storage devices which also supports all dual and single port aggregation. After using two ports on Netgear AC5300 X8 Nighthawk router and on the Network Attached Storage, a Netgear customer can get better output if he wants to watch stored content, such as audio , HD videos , 4K video, saved on the storage device.
The Netgear AC5300 X8 Nighthawk is enabled with the latest MU MIMO advanced technology. If you want us to be more descriptive with this than it means that the Netgear AC5300 X8 Nighthawk has a physical architecture based inside the router to support its wireless AC Wave 2 technology, but MU MIMO support won’t be out till this year. Because Netgear Corporation enables it as part of a software upgrade. Once updated, the router can take the benefits of MU MIMO and increase the number of customers continuously and simultaneously connect to it.
Netgear AC5300 X8 Nighthawk Active Antenna Technology
In this Netgear AC5300 X8 Nighthawk , Netgear networking corporation techies has introduced with a big band a new technology of Active Antenna into the top end router antenna stick. Netgear corporation said, this new antenna technology will change the way that external antennas are powered on by the router. After bypassing the router’s PCB, each antenna will gain from reduced interference, better noise cancelling, and good signal directions , but with this , it won’t pull additional power drawn from the original power outsource. This new antenna tech definitely helps in performance, but it also hurts a little when it comes to the cost which is we would say totally worth it. Netgear corporation techies explained that it is reserving Active Antenna technology for their top-end wireless products, cause of this technology’s introduction Netgear corporation gives a significant contribution to this devices , and upcoming products.
Smart Connect with Netgear Nighthawk
Smart Connect is a new put feature by Netgear Corporation techies in all Netgear Nighthawk machines that allows the router automatically assign wireless devices to an appropriate Wi-Fi band. By knowing to put older devices on the slower band, the Nighthawk X8 can keep slower devices off of the faster networks, thus letting fast devices work faster.
Two additional advanced technologies that are installed on the Netgear AC5300 X8 Nighthawk , are load balancing and Dynamic QoS. This load balancing technology is tied up to the router’s 5 GHz bands and lets wireless users connect to the 5 GHz band with the best quality and durability. Dynamic QoS allows a user to allocate bandwidth to specific applications and helps shape network traffic and its architecture to wireless devices.
When talked about open source support , Netgear Corporation stated it will first release the open source firmware ready and available for the Netgear AC5300 X8 Nighthawk on the company’s open source community website.
Rest of the features of Netgear AC5300 X8 Nighthawk include remote management and access via Netgear’s genie app, enhanced parental control, and ReadyCloud which will allow the customer to attach Universal Serial Bus storage to the Netgear AC5300 X8 and allow access from all most anywhere in the world through a website enabled device.
The Netgear Nighthawk X8 AC5300 Fast , Durable & Smart Wireless Router is available on all the stores online and can be purchased right away for approx. $499.99 US.
For more details Call Australia Router Support (ARS) Inc.’s technicians and 24/7 support representatives to get instant information.